M/S LN Wrench

Construction:
¿¿¿ Aluminum frame: 1.2mm, Sandblasting and Oxidation treatment
¿¿¿ Door leaf: 0.5mm Sandwich panel and Melamine resin board
¿¿¿ Size recommended: 900x2100mm(Single), 1200x2100mm(Picture), 1500x2100mm(Double)

Feature:
¿¿¿ Bumper pad configuration (magnetic door)
¿¿¿ Seamless and adjustable hinges
¿¿¿ Automatic sealing up and down door
¿¿¿ Silicone rubber sealing strip
¿¿¿ Available in antimicrobial coating and anti VIP coating

Technical Parameters & Description: 

Door construction: High density 2.5mm thick stainless steel bending shape with dust proof design. High density EPDM dust proof fixed brush installed inside the door sliding rail with the functions of dust proof, insect proof, sealant and others.

Door curtain: High density special quick door curtain imported from Europe with yellow, blue, transparent and other colors for option. Tensile strength(warp/weft): N/5CM, 4000/3500; tear strength(warp/weft):N6000/6000; applicable temperature°C（-）40~（+）70.

Wind resistant pole: International high density anti-oxidation aluminum alloy wind resistant pole. To achieve the best performance of wind resistance, there are super wind resistant type, medium wind resistant type and small wind resistant type according to the size of door hole and wind pressure. With the updated function of curtain segments replaced, segmented aluminum alloy is with better performance of wind resistance.

Transparency: Horizontal transparent window in the middle of the door, which achieves the visual operation and safe use.

Sealed performance: Sealant in the bottom of door curtain, which can be connected closely with different rough floor. Sealed strip on both side of door frame. (insect proof, dust proof, sound insulation)

electronic interlocking door with simple construction and easy installation, which can control double doors or multi doors interlock to ensure only one door open simultaneously . It keeps the stability of different pressure of near rooms, achieves the sealed isolation, and avoids the cross-contamination.

Features:
1. When a door is open for over 10 seconds, buzzer will prompt to close the door with the sound of “du...”;
2. When a door is open for over 1 minutes, other doors will unlock automatically with the warning of closing the door to keep the room sealant;
3. All electronic locks will open automatically in the condition of power off to keep safety.;
4. Various material and type of door is optional;
    A:  Material: powder coated steel plate, stainless steel, aluminum alloy  ;
    B: Type: ordinary side-hung door, automatic sliding door, automatic quick roller shutter door, and others.

Cleanroom which meets the YY0033-2000 Aseptic Medical Devices Production Management Standard is one of the preconditions 

to ensure the quantity of medical devices and components. From the factory address choosing, layout arranging to people flow and 

material flow planning, how to ensure every key point will meet the demand of FDA or YY0033-2000 Aseptic Medical Devices Production 

Management Standard? Will cleanroom construction meet the requirement of cleanroom planning? How to control the cleanroom condstruction 

during the whole process? How to make sure the cleanroom will pass the check of quality testing department

APPLICATION:
For wall surface and ground of electronics works,chemical works, electrical machinery plant,and oil tank etc.

FEATURES:
1.Everlasting anti-electrostantic property, do not influenced by time, temperature
and humidity.
2.Dust-proof, damp-proof,abrasion resistance;
3.Pressurization, endure heavy load, small cart is available in workshop
4.Antistatic value reach international standard after construction, reduce products
badness rate.
5.Supply a comfortable work environmental to employee.
6.Surface is flat and glossy, mirror surface effect(cleanroom standard).

SERVICE LIFE
Over 8years in general.